A kitchen sink mixer tap is an essential fixture in modern kitchens, combining hot and cold water into a single spout for precise temperature and flow control. Whether replacing an old tap or installing a new one, proper installation ensures smooth operation, leak-free performance, and long-term reliability. With precision-crafted products from LODECE, installation is straightforward and secure, backed by advanced engineering and quality materials.
A mixer tap integrates two water lines—hot and cold—into a single outlet. Users can adjust the flow and temperature easily through one or two handles. High-quality models, such as those produced by LODECE, feature durable brass or stainless steel bodies, ceramic disc cartridges, and corrosion-resistant finishes that ensure reliable operation and lasting beauty.
LODECE’s mixer taps are designed to fit international installation standards, making them compatible with various sink and countertop configurations for residential or commercial projects.
Before beginning, gather these tools and supplies:
| Tools & Materials | Purpose |
|---|---|
| Adjustable wrench | Tighten nuts and connectors |
| Basin wrench | Reach tight spaces under the sink |
| PTFE (Teflon) tape | Seal threaded joints and prevent leaks |
| Screwdriver | Secure mounting brackets |
| Silicone sealant | Ensure waterproof base installation |
| Towels or bucket | Catch any remaining water in the pipes |
Having all tools ready saves time and helps achieve a clean, professional finish.
Turn Off the Water Supply: Locate and close the isolation valves under the sink to stop water flow.
Drain Remaining Water: Open the existing tap to release residual water from the pipes.
Clear the Workspace: Remove cleaning supplies or obstacles from under the sink for better access.
Loosen and disconnect the flexible hoses using a wrench. Unscrew the fixing nuts holding the old tap in place. Lift the tap out from the sink hole and clean the area thoroughly to remove old sealant or residue.
Screw the flexible hot and cold hoses into the base of the new LODECE mixer tap. Hand-tighten only at this stage to avoid thread damage.
Insert the tap’s threaded tails and hoses through the mounting hole in the sink or countertop. Ensure the rubber gasket is seated evenly beneath the tap base to prevent water leakage.
Under the sink, attach the metal washer and fixing nut to the threaded tails. Tighten them evenly with a basin wrench until the tap is firmly positioned. Avoid over-tightening, as it could strain the sink surface.
Attach the flexible hoses to the corresponding hot and cold isolation valves. Wrap the threads with PTFE tape before tightening with a wrench to ensure a watertight seal.
Align the spout and handles properly, ensuring smooth movement and balanced aesthetics.
Turn on the water supply gradually. Let both hot and cold water run for a few minutes to flush out air and debris. Check every connection for leaks and tighten where necessary.
Overtightening connections may damage washers or cause thread stripping.
Skipping PTFE tape can lead to minor but persistent leaks.
Misaligned hoses can cause uneven water flow or noise.
Ignoring gasket placement may allow water to seep under the tap base.
Proper installation practices ensure consistent performance and extend the product’s lifespan.
Clean the Aerator: Remove the aerator every few months to eliminate limescale buildup.
Inspect for Leaks: Regularly check hose joints and handle cartridges for wear.
Use Gentle Cleaners: Avoid abrasive chemicals that can damage finishes.
Operate Smoothly: Handle the lever with care to maintain cartridge integrity.
LODECE’s mixer taps are designed for easy maintenance, with replaceable cartridges and corrosion-resistant internal components that ensure years of trouble-free use.
As a professional manufacturer and wholesaler, LODECE integrates research, precision machining, and strict testing to deliver faucets that exceed international standards.
Production Strengths:
Advanced CNC Machining: Guarantees perfect thread accuracy and structural alignment.
High-Pressure Leak Testing: Each unit is tested to ensure zero leakage under real-world pressure.
Premium Materials: Solid brass or SUS304 stainless steel ensures mechanical stability and corrosion resistance.
Eco-Friendly Surface Finishes: Multi-layer chrome or PVD coatings provide long-term protection and elegant appearance.
Through this integrated process, LODECE provides faucets that combine craftsmanship, functionality, and durability for global partners.
Strong OEM & ODM Capabilities: Supports customization for residential and commercial projects.
Large-Scale Production: Ensures consistent quality and timely delivery.
International Certifications: Complies with lead-free and water-saving standards.
Global Distribution Experience: Widely trusted across Europe, the Middle East, and North America.
LODECE’s expertise allows clients to confidently select taps that meet both aesthetic and technical specifications.
Installing a kitchen sink mixer tap is a straightforward task that enhances kitchen functionality and design. When combined with superior materials and engineering precision, it guarantees long-term performance and water efficiency.
LODECE provides mixer taps built with meticulous craftsmanship, ensuring easy installation, smooth operation, and modern appeal. For homeowners, contractors, and wholesalers alike, choosing LODECE means choosing reliability, precision, and enduring quality in every drop.
